v2.3.0-8-DGW-L302-304-normal-idc-v30-squashfs-sysupgrade-65a9a851.bin *Fixed system hang issue when unloading the DAHDI driver on DGW-L304. *Resolved issue where Channel 1 on each E1 failed to place outbound calls when using R2 group calling during pilot testing. *Fixed system instability caused by OOM (Out of Memory) killer on ASI platforms. *Resolved RTC battery time synchronization failure on DTU-30X. *Fixed audio recording failure on the T1 RX direction for DGW-L304. *Fixed issue where DGW-300X failed to maintain state upon reboot or power loss under Failover Bypass mode. *Added contextual help documentation for Failover mode on DGW-300X. *Fixed issue where Bypass state was lost after reboot, upgrade, or power outage under Manual Bypass Off mode. *Resolved failure to trigger Bypass mode switching during DGW-300X firmware upgrades. *Fixed poor echo cancellation (EC) performance on DGW during high-concurrency call volumes. *Resolved issue where ALM LEDs on main controller and module boards turned solid red after upgrading S1224 firmware. *Fixed audio crosstalk caused by STUN probing multiplexing onto RTP ports. *Resolved performance bottleneck on MTU v2.0 8E1 failing to reach full 248-channel capacity with SS7 + EC. *Corrected dialplan logic errors when failing over to secondary backup lines on digital interfaces. *Mitigated OIAD system security vulnerabilities. *Added redundant power supply status display for DGW-3001/3002/3004. *Optimized port and timeslot status monitoring on OIAD digital gateways. *Adapted application software for MTU v2.0 platform. *Added smart 2M link shutdown feature on aarch64 digital devices. *Implemented automatic SIP 503 response to servers when E1 links are down. *Enabled automatic SIP unregistration upon E1 link failure to alert the SIP peer. *Added option for pre-echo cancellation recording in port audio recording. *Released dedicated system firmware for Uscale UTG2910 (a DGW-300X variant). *Adapted BSP for DTU-302/304. *Adapted BSP for DGW-3001/3002/3004. *Modified download and upload filenames for auto-provisioning. *Linked TR-069 configuration parameters directly with STUN settings. *Added smart 2M link shutdown feature to ETU boards. *Added Turkish language option to OIAD firmware. *Added STUN protocol support for TR-069. *Enhanced invalid input validation for basic settings on OIAD devices. *Optimized `adt-g168` echo cancellation performance on aarch64 architectures. *Enabled active chassis ID reading on localized MTU/ASI/OSU boards. *Simplified DNS SRV configuration page and logic. *Added TDM-to-TDM (Tel-to-Tel) direct routing feature. *Added Web login security policies, including login lockout duration. *Fixed "no such instance" errors on several SNMP OIDs for digital gateways. *Optimized jitter buffer support on the SIP side and buffer handling on the DAHDI side. *Configured E1 gateway to return `603 Declined` to the caller when IP-to-IP destination times out. *Added configurable SLC (Signaling Link Code) options in SS7 settings per Nokia specifications. *Corrected CDR log type to reflect IP-to-SS7 instead of SIP-to-SIP when rejected by the peer.